Garton on the Wolds. Driffield, EY, YO25 3ET

Assist

Assist

  • 460mm Serrated, straight cutting discs 
  • Disc bar is fully height adjustable & independent from the legs.
  • Maximum working depth of 300mm.
  • Adjustable leg/disc centres from 500mm to 750mm
  • Road transport width of just 2.4m 
  • Rear towing clevis with 50mm pin as standard.
  • Hydraulic locking tap on folding rams for road transport.
  • Snap-Bar shear or auto-reset leg protection.
  • Rear hydraulic coupling unit complete with four double acting hydraulic services, ¾ free flow trailer brake coupling and 7 pin plug socket.
  • Available in 3m, 4m and 6m widths
  • Height adjustable 790mm diameter, 400mm wide heavy duty depth wheel for maximum stability
  • Independent lift/lower
  • Tight turn feature

For details on booking a demo, please visit our cultivation demonstration page.

Category:

Description

The Assist Minimum Disturbance Tool Bar is designed to act in the same way as a minimum disturbance subsoiler. The Assist allows for the towing of additional equipment behind the toolbar such as a drill or disc cultivator to enable a one-pass system, reducing compaction in line with modern, minimum tillage systems.

  • 460mm Serrated, straight cutting discs cut through the top layer of soil and trash, allowing the following low disturbance leg to pass through the soil with minimum disruption. By leaving the cover of trash on the field helps protect the soil from water and wind erosion.
  • Disc bar is fully height adjustable & independent from the legs.
  • The following leg combined with a standard issue SUMO GLS point drives through the opening left by the disc at a maximum depth of 300mm. Angled wings on the point lift the soil before it sits back down causing a shattering effect across width of the machine, alleviating compaction, aerating the soil and aiding water infiltration. This is all done with minimum disturbance to the top surface of the soil.
  • REAR ATTACHMENT – Interchangeable, height adjustable towing clevis with 50mm pin.
  • INDEPENDENT LIFT/LOWER – When approaching the headland, the legs and disc on the wings lift out the ground independent from the rest of the machine ensuring that any trailed implement stays level, as if it were being towed by the tractor. We call this independent lift/lower.
  • TIGHT TURN – The leg lift and wing folding operate on the same hydraulic service, meaning when the legs have fully lifted out of the ground, the wings will begin to fold. The folding wings allow for a trailing implement to pass under the machine when tight turning on the headland. We call this feature ‘tight turn’.
  • Leg and disc centres can be swapped from 500mm to 750mm, made easy by our hook on leg socket design.
  • When fully folded into the transport position, the width of the machine is only 2.4m.
  • Hydraulic locking tap on folding rams for road transport.
  • The Assist is fitted with our Snap-Bar shear leg protection.
  • Rear hydraulic coupling unit complete with four double acting hydraulic services, ¾ free flow trailer brake coupling and 7 pin plug socket.
  • Available in 3m, 4m and 6m widths
  • Fitted with height adjustable 790mm diameter, 400mm wide heavy duty depth wheel for maximum stability in work. This also prevents ‘dipping’ of the rear towing attachment when the legs are lifted out of work at the headland.
  • Agriweld Green/ grey or Red / grey colour choice.

Optional Extras

  • Auto-reset leg protection.
  • Rear, interchangeable and adjustable lower linkage with CAT 3 Walterscheid hooks. The linkage is available in either CAT 2/3 or CAT 3/4 widths.
  • ISOBUS extension harness.
  • 5th Double acting hydraulic service.

 

Videos

Downloads

Product Brochure

ASSIST BROCHURE 2021

Product Manual

2021 ASSIST Rear Minimum Disturbance Toolbar

en_GBEnglish