Garton sur les Wolds. Driffield, EY, YO25 3ET

Aider

Aider

The Assist Minimum Disturbance Tool Bar is designed to act in the same way as a minimum disturbance subsoiler.

  • Disques à tronçonner droits et dentelés de 460 mm 
  • Disc bar is fully height adjustable & independent from the legs
  • Maximum working depth of 300mm
  • Centres de jambe/disque réglables de 500 mm à 750 mm
  • Largeur de transport routier de seulement 2,4 m 
  • Rear towing clevis with 50mm pin as standard
  • Hydraulic locking tap on folding rams for road transport
  • Cisaille Snap-Bar ou protection des jambes à réinitialisation automatique
  • Unité d'attelage hydraulique arrière complète avec quatre services hydrauliques à double effet, ¾ d'attelage de frein de remorque à écoulement libre et prise de courant à 7 broches
  • Disponible en largeurs de 3m, 4m et 6m
  • Diamètre de 790 mm réglable en hauteur, roue de profondeur robuste de 400 mm de large pour une stabilité maximale
  • Montée/descente indépendante
  • Fonction virage serré

Pour plus de détails sur la réservation d'une démo, veuillez visiter notre démonstration de culture page.

Catégorie :

La description

The Assist allows for the towing of additional equipment behind the toolbar such as a drill or disc cultivator to enable a one-pass system, reducing compaction in line with modern, minimum tillage systems.

Caractéristiques standards

  • 460mm Serrated, straight cutting discs cut through the top layer of soil and trash, allowing the following low disturbance leg to pass through the soil with minimum disruption
  • By leaving the cover of trash on the field helps protect the soil from water and wind erosion
  • Disc bar is fully height adjustable & independent from the legs
  • The following leg combined with a standard issue SUMO GLS point drives through the opening left by the disc at a maximum depth of 300mm. Angled wings on the point lift the soil before it sits back down causing a shattering effect across width of the machine, alleviating compaction, aerating the soil and aiding water infiltration. This is all done with minimum disturbance to the top surface of the soil
  • ATTACHEMENT ARRIÈRE – Chape de remorquage interchangeable et réglable en hauteur avec axe de 50 mm
  • INDEPENDENT LIFT/LOWER – When approaching the headland, the legs and disc on the wings lift out the ground independent from the rest of the machine ensuring that any trailed implement stays level, as if it were being towed by the tractor. We call this independent lift/lower
  • TIGHT TURN – The leg lift and wing folding operate on the same hydraulic service, meaning when the legs have fully lifted out of the ground, the wings will begin to fold. The folding wings allow for a trailing implement to pass under the machine when tight turning on the headland. We call this feature ‘tight turn’
  • Leg and disc centres can be swapped from 500mm to 750mm, made easy by our hook on leg socket design
  • When fully folded into the transport position, the width of the machine is only 2.4m
  • Hydraulic locking tap on folding rams for road transport
  • L'Assist est équipé de notre Protection de jambe de cisaillement Snap-Bar
  • Unité d'attelage hydraulique arrière complète avec quatre services hydrauliques à double effet, ¾ d'attelage de frein de remorque à écoulement libre et prise de courant à 7 broches
  • Disponible en largeurs de 3m, 4m et 6m
  • Fitted with height adjustable 790mm diameter, 400mm wide heavy duty depth wheel for maximum stability in work. This also prevents ‘dipping’ of the rear towing attachment when the legs are lifted out of work at the headland
  • Agriweld green/grey or red/grey colour choice

Suppléments en option

 

Vidéos

Téléchargements

Brochure de produit

BROCHURE ASSISTANCE 2021

Manuel du produit

Barre d'outils de perturbation minimale arrière 2021 ASSIST

fr_FRFrench